Products
- Screw type PCB terminals
- Spring loaded PCB terminals
- The fence type PCB terminals
- Plug type PCB terminals
- Wire connector
- SAK JXB guide rail type terminal
- UK rail type terminal
- JF5 guide rail type terminal
- JH series combination terminals
- Guide rail type spring terminals
- TD guide rail type terminal
- TD guide rail type terminal
- Stationary terminals
- IN series connection terminal
- Surge protector
- The wall USB charging socket
- The wall switch
- Wall panel type AP router
This current location is:
KW-C40(NPE)
click: 3619
Product introductionKW - C40 (3 + NPE) surge protector is used for ac 50 hz / 60 hz, 380 v, TN and TN under - S - C, TN - C - S, TT, IT is power supply system, the product is installed on the 35 mm electric guide shell design, built-in failure from
Detailed description
- technical
- Dimension
- Ordering
- Related
KW - C40 (3 + NPE) surge protector is used for ac 50 hz / 60 hz, 380 v, TN and TN under - S - C, TN - C - S, TT, IT is power supply system, the product is installed on the 35 mm electric guide shell design, built-in failure from the device, when the surge protector for flow overheating, puncture failure, failure from the device can automatically pulled away from the grid, at the same time, visual warning device to a red from green (normal) (failure). The surge protector module can be replaced with a working voltage.
Product features
Adopt the patented technology for the protection of metal shielding modules.
The technology of overheat and temperature control.
Module design, installation is convenient, can be changed online.
Small leakage current, quick response time, low.
Warning device, green (normal), red (fault).
New technology, high energy, interstitial discharge electrode (n-pe).
Product application and installation location
Installed in LPZOB area and LPZ1 area with LPZ2 area, usually installed in the center of the floor distribution box, computer, telecom equipment room, elevator control, frequency conversion control room equipment, hospital operating room, care unit and is equipped with electronic medical equipment of power distribution cabinet and dispersible cottage (SPD) should be installed in resident distribution box.
Product design and order information: 1, the user should specify the model number and quantity in detail when designing and ordering the product. For example, kw-c40 / (3 + NPE) -385,8.
Technical parameters
|
Maximum continuous working voltage (Uc) |
275V |
320V |
385V |
420V |
440V |
|
|
Voltage protection level (Up) |
<1.0kV |
<1.5kV |
<1.5kV |
<2.0kV |
<2.0kV |
|
|
Nominal discharge current (In) |
20kA |
Iimp(10/350): |
||||
|
Maximum discharge current (Imax) |
40kA |
12.5kA |
||||
|
The response time |
<25 ns |
|||||
|
The test on the basis of |
GB18802.1、IEC61643-1 |
|||||
|
Plug in wire area L/N(mm2) |
25-35 mm2 |
|||||
|
Access to the ground connection area PE(mm2) |
25-35 mm2 |
|||||
|
Type of circuit breaker or circuit breaker |
10A~16A |
|||||
|
The work environment |
-40℃~+85℃ |
|||||
|
Relative humidity |
<95% |
|||||
|
The installation |
Standard guide rail35mm |
|||||
